Avatar

SK!TR – 2nd Attempt

8 May 2011

When I first built SK!TR I was using HK 10g 2000kv motors and didn’t have much luck. I tried the red KK board and a MWC, both were unflyable. Don’t really like those motors now.

Here is my latest quad, a 8″ with Jussi’s shield and a genuine WMP. The frame is a prototype that will eventually be available from Daedalus Multicopter. I am testing out the setup for them.

I am now using the same motors that come from Minsoo’s mini quad kit: www.dealextreme.com/p/a1510-2…ss-motor-45731

I tried the KK red board on this setup and it was really shaky even with the pots turned way down.

The rest is GWS 5×3 tri-blade, proton 6A ESCs and a 2S 500mAh zippy. I will eventually switch to the Warthox shield as the frame was designed to use the shield as the center piece.

Will make some video soon, just got it flying and it might need some more PID tuning.



  • The CopterControl board from the OpenPilot project would go well on these small frames maybe?

SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7
SK!TR - 7