Zuul Racehound: Frame Assembly
Carbon Fiber plates and 3D Printed Spacers
Attach 2x M3x35mm spacers using 2x M3x5mm screws to the front of the top base plate.
Attach the 4x M3x18mm nylon spacers to the lower base plate using the 4x M3x5mm nylon screws to the lower base plate. These are for mounting your flight controller.
Place the 3D printed spacers with 8x M3x18mm screws. Use the following holes for folable arms.
Use the following holes to lock the arms in place.
Temporarily attach the arms using 8x M3 lock nuts. At this point you should mount the motors, ESCs and power distribution.
Attach the upper base plate.
Use 4x M3x18mm screws, 10mm spacers and 35mm spacers to secure the sides of the base plates.
Insert the CCD mount plate and firewall plate.
Attach the top plate using 6x M3x5mm screws.