Tried some flips mid-forward flight. A few crashes but I am getting them down. Best viewed in HD and fullscreen.
No Comments
Jötunn Archive
Current Configuration:
Flight board: Shield, Arduino Pro Mini, Gyros from a Wiimotion+ from eBay
Frame: Kinjal Carbon Fiber from Daedalus Multicopter
Motors: Keda 20-50S 1088 Kv
ESCs: Exceed-RC 10A
Props: EPP 8″
Lipo: 1300mAh 3S Turnigy Nano-Tech
Radio: Spektrum DX8
DISCLAIMER
I do not manufacture or sell any products. All my flying craft are given names that I choose. These are not product names. Listed above is all the information about my builds with links to purchase the various components.
I do not manufacture or sell any products. All my flying craft are given names that I choose. These are not product names. Listed above is all the information about my builds with links to purchase the various components.
Practiced my flips, rolls and loops today. My PID settings allow for real fast flips, which are getting easy to do (and at lower altitudes). It is doing large loops that I think are tricky, have to time it and judge how much nick/roll to give it.
Learning to do fast flips and rolls with Jötunn. Thanks to Warthox for the MWC gain settings. Best viewed in HD and fullscreen to see what is going on. Wide gopro makes things look small.
I have swapped out the motors and ESCs on Jötunn to use the Keda 20-50S 1088 Kv motors and 10A ESCs. With this change and using a 1300mAh or less lipo, I have greatly reduced the weight of the quad. This reduction makes it much more agile and reduces the force...
Here is some video of the 12″ Carbon “Kinjal” Frame in action.
Here it is, the 12″ carbon fiber “Kinjal” frame from Daedalus Multicopter. I just finished re-building Jötunn with this frame. I am currently also trying out the new blue Kapteinkuk boards from kkmulticopter.kr Purchasing info can be found at...
Started building the flight board for a MultiWiiCopter. I will be putting it in my mini quad Jötunn. The shield for the board is from MultiWiiCopter.com. Just waiting on the FTDI breakout board so that I can program it.
I decided to build a mini KapteinKuk quad to learn aerobatic flight like the mighty Warthox. The frame uses custom made aluminum arms, Mikrokopter quad center plates and a few parts from my Jakub J frame.
